APPLICATIONS

Monitoring Levels in:

 - Sewage Treatment Plants

 - Bar Screen Control

 - Industrial Storage Tanks

 - Wet Well Lift Station Control

 - Railroad Tank Cars

 - Positioning Control

 - Lagoon and Basin Level Control

FEATURES

Standard

 - Quick, Easy, Menu Driven Programming

 - Five Control Relays with ON/OFF settings for 

   Alarms, Pumps etc.

 - 200 Day Data Logging of end of day  liquid level 

    and total gallons of product

 - Waterproof NEMA 4X, IP65 Rated Fiberglass 

   Enclosure With Clear Hinged cover

 - Two Independent 4-20 mA. outputs, 

    programmable

 - Alternate LEAD/LAG function

TANK CONFIGURATIONS

built-in Equations

 - Cylindrical  10-999 inch diameter  

 - Rectangular  1-999 inches per side

 - Square  1-999 inches per side

 - Horizontal 

 - Sphere

 - None

Dimensions used to calculate approximate stored gallons

Electronics

Power:              120/220 VAC, ±15%, 50/60 Hz @ 15 watts max. 

Temperature:    20°F to 120°F

Display:             2 x 20 character, alphanumeric LCD with backlight

Totalizer:           8 digit accumulative with programmable multiplier;         

                         x1, x10, x100, x1000

Outputs*:          Two independent 4-20 mA isolated into 1000 ohm load      

                         each, ±1.0% of full scale.  

                         RS-232 terminal ( USB with adapter ), 5  control 

                         relays with ON/OFF settings, LEAD/LAG function, all  

                         programmable. Relay contacts SPDT 5A/250 VAC

Span Range:    0-10.0” to 0-220.00” 

Dead Band:      12.0” to 36.0” adjustable blanking

Resolution:       0.01”, 0.01 GPM ( LCD Display )

Accuracy**:      ±0.7% of range.  Calculated error ±0.04%

Memory:           Flash and non-volatile RAM ( 3 V battery backup )

Equations:        Cylindrical, Rectangular, Square, Sphere, Horizontal, None

Data Log*:       200 day, 24 hour flow summary: min, max Levels, time 

                        stamped, end of day level and gallons. ( down load or view 

                        on LCD display )

                        Sampled level in inches with programmable log rate of

                        00-99 minutes ( 1 minute increments ) time  stamped  

                        EVENT list time stamped 

*    The ERS-560DX unit has no relay / RS-232 outputs or data logging

**   Field conditions, such as turbulence, poor installation etc., may  

      affect the apparent accuracy.

ERS-560/560DX Level Monitor Specifications          8/20

Sensor w/Temp Probe ( US70TC Sensor )

Material:             PVC Housing, Epoxy

Beam / Freq.:     5° Conical, 40 Khz pulsed

Temperature:    -10°F to 120°F operating

Cable:                30 foot twisted pair, Up to 600 ft. spliced in-field.  Belden # 8451 or equal.

Dimensions:       3.0” dia. x 4.2” len

Mounting:           3/4” male ( 3/4” female with supplied union joint )

Rating:               Sensor is considered explosion proof, corrosion resistant, immersible

Enclosure

Material:            Fiberglass with clear hinged Polycarbonate cover, stainless steel hinges  

                          and  mounting hardware

Rating:              NEMA 4X, IP65, Dust-Tight, Water-Tight, Corrosion Resistant, CSA / UL 

                          listed

Dimensions:      7.2” x 11.8” x 6.8”

Mounting:          4.92” x 12.3”

Options

PVC Sensor Mounting Kit;  Additional Sensor cable; Additional Manuals; 120 VAC, 6 foot power cord installed

Warranty

The ERS-560 and 560DX units are pretested and inspected before shipping.  Warranty is against defects in parts and workmanship for a period of one (1) year from ship date.